#gasmask
For YJ-4925, the soft hissing sound of a good seal was the sound she always dreamed of. The hiss and the sweet smell of sulfur.
She desired a life of conflict, aggression, and destruction and she was going to get it. She was assigned to be an invasion trooper, ready to combat biology and bring all under synthetic rule. Naturally, the atmospheres of most planets contained toxic gases like oxygen or nitrogen so the ability to protect her from these hazards meant her new lungs needed help. Now designed to breathe radon and carbon monoxide on all controlled planets, YJ-4925 wouldn’t survive long (until she’s completely rid of her biological components), so her suit was to protect her from toxicity like Earth’s atmosphere, and not risk any contact with biology that could risk her conversion.
The suit was by far the best part as far as YJ-4925 was concerned. She was completely identical to the other invasion troopers. She was reshaped to be of equal height, weight, and build of the other troopers. Even as they were all at different parts of their conversion, and some were among the robots that commanded her, she would be able to enjoy life as a completely interchangeable tool. Only for the very ability to be aware of her surroundings at all to be taken from her in the future.
Until then she was just a passenger in her own body. She would watch as she helped to topple entire planetary systems, bringing the organics under control. Her body would drag innocent organics for complete mechanization and assignment in the war to destroy biology. She would look in disgust at things like blood, muscle, and tissue only to watch as it’s replaced by superior systems. Maybe she would get to process future troopers like herself, watching them disappear under the mask and join her fellow robots (and semi-converts) in the ocean of identical and perfect soldiers.
YJ-4925 imagined this future as she marched to the ship where she would continue her conversion until she was complete, or sent to battle. Her optics picked up her fellow troopers as she filled in the last spot in the formation. She watched with anticipation as she marched in perfect harmony with her trooper regiment as the loading ramp opened. 2535 current and future robots boarded the ship and came to a halt in the cargo platform.
The engines came to life as a transmission came through her processor.
“YJ-4925. Run consciousness erasure program.”
She only had a second to hear the words and a small spark of panic entered her mind… until it was gone.
The ship set a course for Planet 85390-Z with 2535 mindless and soulless machines ready for war.
Post link
Another school work, this one for my concept art course. We had to design a mask that fit a theme randomly assigned. I got: nazi for Hellboy. #concept #conceptart #mask #hellboy #artwork #photoshop #art #illustration #artistofmontreal #digitalart #digitalillustrator #digitalpainting #gasmask #gasmaskgirl #artist
https://www.instagram.com/p/CGSnG5vHrz4/?igshid=3522pgegwfq9
Post link
I’m new to Instagram and just posted this so people can see what I make and sell on eBay. Right and left handed hoses at either side and one with a gas mask and rebreather bag in the middle. The poppers aromas pump hoses work like a dream.
Mistress Maggie with her Gas Station.
It’s an ‘industrial’ version of my original pump hose design. Bottom left is the aromas pump, then it’s the bubble bottle, and bottom right is the air inlet. Top left is the regular gas mask hose connector, the centre valve allows the rebreather bag to be included, and the top right connector is for a second gas mask to allow a shared experience.
The pump hoses pictured, are two of the current, flow limited, versions which I make and sell on eBay. I’m delighted to say that they are not just getting wonderful feedback, but buyers are sending some very appreciative messages too –
From a buyer in America:
I received your pump and hose assembly today. Put it together per your instructions (very well done by the way). Then put is some aroma and gave it a try. Followed your breath out and pump advice and it worked like a charm. Very smooth delivery only when pumped. A very controlled and effective amount delivered with each set of pumps. I had only intended to try it out to make sure it worked but ended up with a nice little session going for awhile. The amount delivered was so consistent the whole process was very pleasurable as there were no weak or overly strong surprises.
Great job all around and I will be glad to recommend this to all the aroma players I know.
From a buyer in Germany:
Yesterday I got your package and of course tried the hose directly - and what can I say: It’s awesome. You’ve really crafted the perfect accessory for poppers consumption. You always get exactly the right amount of it. 3 pump strokes for a little bit or 6 to get the full charge. An absolutely awesome experience. Thank you for your great product! I am sure that I will have many years of fun with it :-)
There is no better way to enjoy aromas with a gas mask, the hoses simply do exactly what you want, when you want.
New human character for our #indiegame #Endling by @herobeatstudios
.
#indiedev #gameart #vectorart #characterdesign #conceptart #artprocess #gasmask #cage #trap #herobeatstudios (en Barcelona, Spain)
https://www.instagram.com/p/Bx2oZt6CrZe/?igshid=10z618gnymhe2
Post link
A commission.
Enjoy~!
https://aweye-ff.deviantart.com/- DA Page.
https://www.patreon.com/aweye Patreon Page.
https://picarto.tv/Aweye For livestreams, follow me here
Post link
Brussels 2020 - With my boyfriend, we created our own latex catsuits “made to measure”. First step: cover your body with bin bag, then layer tightly with duct tape. Draw with pencil anatomic lines and points, that will be very useful (hips, etc, the more detail, the better !!). Also it is helpful to draw horizontal lines that will be used for horizontal reduction work on latex.
Cut through selected lines to get a first set of patters.
All the game is to get patterns as flat as possible to be able to draw them on paper: 3D –> 2D. Where it is not flat enough you should divide again the the part. Draw your flattened patterns on paper. This is what your real body is like on 2D !
Then it is time to apply your horizontal reduction. Apply a reduction coefficient to your paper patterns. For 0.7 mm thickness latex reduce by 5-7% the size through horizontal lines. For 0.4 mm use a reduction coefficient of around 10%.
Redraw with horizontal correction (we do not use vertical reduction).
Then draw your reduced paper pattern on latex adding a margin of ca 5 mm for glueing. Cut latex (rotary cutter), clean edges (isopropanol or white spirit), glue (careful as glue is solvent based, use a gasmask or properly ventilate), wait, stick edges together.
You may also decide to add a zipper to your work. I’ll publish another post to explain how to do that.
Post link
Breathe :p (self-made orange and olive-green rubber) - BRUSSELS 2020 - outdoor88 (GR, recon, fetlife)
Post link
Laying in my bathroom in full neoprene with breath control. Also had a rubber cocksheath on :p - was hot - BRUSSELS 2020
Post link
