#worbla armor

Nothing is worse than putting the last details on your prop, messing up, and not having enough time or supplies to fix it. These tips will help save you a lot of grief in the long run.

1.   Research the piece you’re making. Whatever you do, research the fudge out of every prop you make. If you’re making armor for a specific character, find several different pictures and videos of that character from all angles. If it’s wings for a steampunk prop, look up a few species of birds and see how their feathers come together. This is intrinsic to getting your pattern right. After all, you don’t want to get to the event only to realize that your prop is totally wrong.

2.   Do mock-ups. Whenever I’m getting ready to make a prop, I sketch it out and construct it in paper first. It might seem excessive, but it will make the entire project run more smoothly. Mock-ups help you:

     a.    See where there will be strain in the prop.

     b.    Determine the best way to connect each piece.

     c.    Rework the design if something isn’t meshing.

     d.    Create a template for your patterns.

3.   Make sure your pattern is perfect. Never rush making the pattern that you’ll use to cut out the pieces for your project. If you start with ill-fitting pieces, the best you’ll get out of all your work is a bad-looking prop. At the worst you’ll get to the event and have it fall apart around you.

4.   Beware of hot tools. I once burned my heel with a heat gun so bad that I couldn’t walk right for a month, and now I have a permanent scar. If you’re using a heat gun, make sure you have somewhere safe to put it when you’re molding your prop. If you’re working in boiling water, look out for drips of hot water.

5.   Beware of hot plastic. The plastic will get deceptively hot as well, and a lot of times you won’t notice it until it burns you. If you don’t want lobster red, hyper-sensitive fingertips for weeks, use thin leather gloves and proxy tools (rollers, spoons, etc.) to work on your prop.

6.   Don’t leave your props in the heat. They won’t totally melt, but they will get bent out of shape…and then you will too.

     a.    When you’re driving to your event, make sure any Wonderflex or Worbla props are packed in a cooled compartment out of the sunlight.

     b.    When you come home, keep them safely stored in room temperature or below and don’t put them in front of a window. It’s pretty easy to fix the droopy parts if your prop does melt, but you won’t want to do it.

And finally…

1.    Save your scraps.

2.    Fit together your pattern pieces like a jigsaw on your sheet.

3.    Use primer!

4.    Glue beforeyou paint.

5.    Don’t try to bend or stretch the material too far.

6.    Hold the corners of each unrolled sheet down with weights.

7.    Prevent bending by using several layers of material.

8.    Mix and match Wonderflex and Worbla so you’re always using the best material for the job.

9.  Update old patterns for new projects.

Stupid mistakes end up costing you a lot of time and money, not to mention bodily harm. Try to keep these in mind when you’re working on your next prop and you’ll be amazed at how well it turns out.

You can’t wait to start making your home-brewed suit of armor, but you’re not sure what you’ll need before you sit down. Here are some basic tools that you’ll use whenever you’re working with Wonderflex and Worbla:

Pencil

So you can mark where you will cut.

Paper

If you’re prone to making mistakes, it’s good to make stencils on paper and cut out each piece according to them.

Tape

For keeping stencils down.

Scissors

For long, straight cuts and trimming frayed edges.

Exacto knife

For cutting intricate designs. You’ll want to get a lotof these.

Heat gun

A hairdryer on PCP. A heat gun is, hands-down, the single most useful tool you will have at your disposal. It heats up quickly, will let you target specific areas, and gets the plastic nice and malleable faster than anything else will. You can get one for a little over $20 on Amazon. A microwave or heater will do if you don’t have a heat gun, but trust me, this is so much better.

And that’s it. Six tools and a whole world of prop-making has opened up before you.

This guide was made under the wing of Costume Discounters (www.costumediscounters.com). Please go check out their site!! They sell wigs, shoes, shirts, essentials…all sorts of goodies.

Armor bits. I did not miss working with worbla honestly lol.